30 years in knitwear · Samples in 3–5 days · MOQ 300 pcs per style

Skip to content

Knitwear quality

How to Stop Sweaters Pilling.

Why sweaters pill, how to remove and reduce pills, and what a brand can agree with its factory before bulk so that pilling does not turn into returns.

What pilling is

Small balls of fibre on the surface.

Pilling happens when short fibres work loose from the yarn through friction, tangle together and form small balls, or pills, on the surface. It shows first where the garment rubs: under the arms, at the sides, on the cuffs and where a bag strap sits.

Pills on pure wool or cashmere tend to break off over time. Pills on blends with strong synthetic fibres, such as polyester or nylon, stay anchored, so the garment keeps looking worn.

Causes

Why some sweaters pill more than others.

Factor Pills more Pills less
Fibre length Short fibres, including some low-cost wool and cashmere Long fibres, combed or worsted yarns
Yarn twist Soft, low-twist yarns Higher twist, plied or compact yarns
Knit density Loose knit, low stitch density for the gauge Tighter knit at the right density for the yarn
Yarn finish No finishing Singed yarns or an anti-pilling finish
Blend Soft fibres anchored by strong synthetic fibres Blends chosen and tested for the intended use

Very soft, airy yarns feel luxurious but are often the most prone to pilling, so hand-feel and durability have to be balanced.

Yarn cones in a wide range of colours for custom knitwear
Yarn choice decides most of the pilling risk: fibre length, twist and finish.

Testing

How pilling is measured.

Pilling is graded from 5 (no pilling) to 1 (severe pilling) by comparing a tested sample with reference photos. Common test methods for knitwear are ISO 12945-1 (pilling box), ISO 12945-2 (modified Martindale) and ASTM D3512 (random tumble). Many brands set grade 3–4 as the target for sweaters.

Tests are run by a third-party laboratory on fabric or garments from the actual yarn lot, so agree the method, the number of cycles and the minimum grade before bulk production.

Care

How to remove and reduce pilling at home.

Pills can be removed with a fabric shaver or a sweater comb, working gently on a flat surface. To reduce new pilling, wash knitwear inside out on a gentle or wool cycle, avoid washing it with rough fabrics such as denim, and dry it flat. These steps help, but the biggest difference is made before the sweater is sold: by the yarn, the knit and the finish.

Prevention

What brands can agree with their factory.

  • Yarn: choose singed, plied or compact yarns where pilling matters, and confirm the yarn supplier and lot.
  • Density: knit at the right density for the yarn and gauge; a looser knit saves yarn but pills sooner.
  • Finish: ask whether an anti-pilling finish suits the fibre and the hand-feel you want.
  • Standard: write the test method and minimum grade into the order, and test the bulk yarn lot, not only the sample.
  • Care label: washing inside out, on a gentle wool cycle, reduces friction for the end customer.

Our knitwear quality control guide shows where pilling fits among the checks before shipment, and best yarn for sweaters compares how common fibres perform.

Rainbow swirl brushed mohair cardigan, style DS25-K08031, from the Knitwear World sample collection
Brushed, airy yarns such as mohair feel soft; yarn quality and knit density decide how much they pill.

Start a project

Tell us which yarn and hand-feel you want.