30 years in knitwear · Samples in 3–5 days · MOQ 300 pcs per style

Skip to content

Size and fit

How to Measure a Sweater.

The points of measure brands use in a knitwear size chart, how to measure each one on a flat garment, and what to agree with your factory so that every size comes out right.

Before you measure

Measure flat, relaxed and the same way every time.

Lay the sweater flat on a table, smooth it without stretching, and button or zip it closed. Measure with a soft tape in centimetres or inches, and use the same method on the sample, the reference garment and the bulk. Knitwear relaxes and can change after washing, so agree whether measurements apply before or after washing; for most styles we approve a washed sample.

Points of measure

The measurements in a sweater size chart.

Points of measure on a flat sweater: A body length, B chest width, C hem width, E shoulder width, F sleeve length, G armhole depth, H upper arm, I cuff width, J neck width, K front neck dropABCEJFGHIK
Main points of measure on a flat crew-neck sweater. D (hem width, stretched) and L (rib heights) are listed in the table below.
Point of measure How to measure
A · Body length From the high point of the shoulder (HPS), next to the neckline, straight down to the hem edge.
B · Chest width Edge to edge, 2.5 cm (1 in) below the armhole.
C · Hem width, relaxed Edge to edge along the bottom of the hem rib, without stretching.
D · Hem width, stretched The same line, gently stretched to the full extension of the rib.
E · Shoulder width Shoulder seam to shoulder seam, straight across the back.
F · Sleeve length Shoulder seam to cuff edge; for raglan sleeves, centre back neck to cuff edge.
G · Armhole depth Straight from the shoulder point to the underarm.
H · Upper arm Across the sleeve, 2.5 cm below the armhole.
I · Cuff width, relaxed Edge to edge at the cuff opening.
J · Neck width Seam to seam across the neck opening.
K · Front neck drop From the line between the high points of the shoulder down to the front neckline seam.
L · Rib heights Height of the hem, cuff and neck ribs.

Add any style-specific points, such as pocket position, placket length or the position of a knitted logo.

Grading and tolerances

From one sample size to a full size range.

Send the measurements for your sample size and the grade rule between sizes, or a full size chart. Agree a tolerance for each point of measure: a common starting point for knitwear is about ±1 cm on smaller measurements, such as neck and cuff, and ±1.5–2 cm on body length and chest width. Fine gauges can be held tighter than chunky knits.

Write the size chart into your tech pack, and check every size on the pre-production sample before bulk.

Steam pressing knitted garments to size and shape at Knitwear World, Jiaxing
Steam pressing sets each sweater to size and shape before it is measured.

Common mistakes

Where size charts go wrong.

  • Measuring a reference garment on a body or a hanger instead of flat.
  • Mixing chest circumference and chest width in the same chart.
  • Approving an unwashed sample for a style that shrinks or relaxes when washed.
  • Not stating relaxed and stretched widths for ribbed hems and cuffs.
Final inspection and folding area at Knitwear World with finished sweaters ready for packing
At final inspection, bulk garments are checked against the approved size chart and tolerances.

Start a project

Send your size chart with your brief.